Our stock

Research

By make

By type

All machinery

Our stock

BLADE GRINDER GÖCKEL GB 65 U65el


Make Model Year Serial
 GÖCKEL  GÖCKEL GB 65 U65 el ( 300 x 3.200 mm)  

1988

 
  • Accessories / Special Features
  • Machine is equipped with 2 grinding slides – one with a tangential grinding
  • head and the other with a segmental grinding head.
  • Ideal for roughing and finishing.
  • All grinding processes are
    supervised by a PLC control and can be programmed using “teach-in” software.
  • All values are digitally displayed on the control panel.
  • Work table, swivelling 2 x 90°; with magnetic chuck and 2 lateral clamping areas with t-slots for straight and inclined grinding, also on the same workpiece.
  • Adhesive force of magnetic chuck can be preset.
  • Motor-drive table swivelling.
  • Infinitely variable settings of speed of each grinding slide.
  • Motor-driven adjustment of grinding head, vertical and cross, and fast motion up/down.
  • Dressing device for both grinding heads, located after the magnetic chuck.
  • Separate switch cabinet.
  • Separate control cabinet.

Spécifications :


  • Grinding range, approx. 300 x 3,200 mm
  • Magnetic chuck, swivelling 200 x 3,100 mm
  • Side tables, approx. 180 x 3,100 mm
  • Working height under grinding wheel, approx. 200 mm
  • Grinding slide travel speed 0.02 – 30 m/min
  • Grinding spindle infeed 0.0002 – 0.2 mm

  • High-Precision Surface Grinder
    with vertical grinding head and tangential grinding head for
    pendular grinding and plunge-cut grinding

  • GB 65 – Grinding Slide with Vertical Segmental Head:
  • Grinding wheel Ø x height (ring) 450 x 70 mm
  • Grinding wheel speeds 920 rpm
  • Grinding spindle drive 30 kW
  • U 65 – Grinding Slide with Tangential Grinding Spindle:
  • Grinding wheel Ø x width x bore 350 x 70 x 150 mm
  • Grinding wheel speed and drive 1,500 rpm / 11 kW

  • Total electrical load, approx. 45 kW - 380 V - 50 Hz
  • Weight, approx. 10,000 kg
  • Required space 10,000 x 2,500 x 2,000 mm
Request an offer
Print
Bureau (Office) & Atelier (Workshop) : 5 rue Barrouin 42000 Saint-Etienne (France)
Tel : +33 (0)4 77 36 59 90 / Fax : +33 (0)4 77 55 21 23 / E-mail : axel@axel-machines.com